6FC5203-0AF05-0AA0 Siemens OP015A Keypad Membrane

Front and rear side of Siemens 6FC5203-0AF05-0AA0 Membrane Keyboard
The front interface is USB 1.1 to connect an external keyboard or mouse. Note that the electromagnetic compatibility of commercially available peripheral devices operated via the USB port of 6FC5 203-0AF05-0AA0 is usually rated for office use only. For industrial use, components with a higher degree of certification are recommended. The rear interface of 6FC52030AF050AA0 Membrane Keypad Switch has two cables for connecting the PCU: I/O USB cable K1 (ribbon cable): All signals that are used for the display interface and the connection of operator panel fronts (e.g.supply voltages) and Display cable K2.

Preparation for mounting of Siemens 6FC52030AF050AA0 Switch Membrane
Thanks to the tension jacks on the OP 015A 6FC5203-0AF05-0AA0, drill-holes or screw holes are not needed. This retaining method also affords a degree of protection IP65 (but only in conjunction with a circumferential seal and when the protective USB cap is fitted). If you want to combine the OP 015A 6FC5 203-0AF05-0AA0 Membrane Keypad with a PCU and possibly a direct control key module, assemble the components before installing them on the mounting wall.

Mounting 6FC5203-0AF05-0AA0 Terminal Keypad on the mounting wall
The clearance at the rear of the PCU must be at least 10 mm to ensure sufficient ventilation. Permitted mounting position: deviating by up to 5 from the vertical. This value can be further restricted by installed components of 6FC52030AF050AA0 Operator Keyboard (PCU, video link receiver,...).